Lubricating Oil Pump
Pioneers in the industry, we offer yung tien chiba lubricating oil pump tm-302fw-2tp and yung tien chiba lubricating oil pump from India.
Yung Tien Chiba Lubricating Oil Pump TM-302FW-2TP
Request Callback
₹ 19500 / Piece Get Latest Price
Product Brochure
| Capacity | 3 LPM |
| Power | 0.25 HP |
| Material | Plastic |
| Max Flow Rate | 0.3 LPM |
| Head | 2 meter |
Minimum order quantity: 1 Piece
Function & Features:
- pressure output is designed with adjustable output structure to meet the demand of various machines and available to couple with relative pressure adjustment. Designed with oil level detector to detect the oil capacity stored in the tank and response well at appropriate time to succeed for connection movement step. Instant knob to have deviced with in-time demand button and lets machine, while at initial start, have the deserved oil capacity for smooth operation to reduce unnecessary friction. Absorbs oil from the deepest part and makes use of principle of Pascal to increase greatly the oil output power as well as to remove the shortcoming of gap between oil tubes. Designed with oil pressure detector (3~10kg/cm2), featured as follows to detect for the loss below:
- (1) Broken oil tube: detecting if insufficient pressure inside the tube. (2) Blockaded oil network: detecting if any blockaded on oil inlet for the sake of turbid oil condition. (3) Poor motor: detecting if the motor had poor running, (4) Insufficient oil pressure: detecting if the output power is insufficient for old used part to result in insufficient pressure condition. (5) No oil in the tank: Detecting and alarm output if the oil level than the safe level. 功能特長 FUNCTION AND FEATURES F. 電動系列 TM型抵抗式/脫壓式潤滑幫浦Resistant-type / Pressure-relief Lubricant Pump TM-3F、TM-3CF型可由PLC直接輸出或由外部計時器做直接或間接的控制運轉。 使用TM-3F、3CF型時可配合調整式分配器，VB,DB-A, DB-AS及抵抗式接頭P型，使用壓力可調整在3-5kg/cm2，接頭流量規 格使用設計差距勿過大，如(#0, #1, #2)，(#1, #2, #3)配較適合。 使用TM-3FW、3CFW型附有脫壓結構型時可配合使用定量容積式分配器HA、HBL、HBH，並可增設壓力檢知回饋，以確認管 路壓力是否達到標準15kg/cm2使用壓力檢知回饋信號時，必須增設延時TIMER及偵測TIMER在正常時壓力開關確認後而帶動 延時TIMER計時適時的操作，反之在偵測時間60秒內無法達到所設定的壓力時，必須設定警報及斷電，繼而檢查各項的缺失。 使用TM-3FW、3CFW型配合使用容積式分配器時因使用壓力較高，因此所使用的各式油管也必須配合使用較高壓型油管， 才能發揮最大的功能。 因使用地區的溫度不同，使用者必須注意因溫差所導致油粘度變化，而更換適合的油質及使用壓力，氣溫在20º以下的則可選用 20#的機油，而氣溫在20º以上的則可選用30#的機油，而使用的壓力也必須有所調整。 使用說明DIRECTION OF USE G. 1. 2. 3. 4. 5. 1.
Yung Tien Chiba Lubricating Oil Pump
Request Callback
₹ 22900 / Piece Get Latest Price
Product Brochure
| Capacity | 3 L |
| Power | 1 HP |
| Automation Grade | Automatic |
| Head | 10 m |
| Max Flow Rate | 0.3 / 0.36 L/min |
| Material | Metal |
| Voltage | 110 V AC |
| OIL TYPE | Lubrication Oil |
| Warranty | 3 MONTHS |
| Max Pressure | 15 KGF/CM SQ |
| Electric Power V | 110 V OR 220 V AC |
| Frequency Hertz | 50 HZ |
| Brand | Chiba |
Minimum order quantity: 1 Piece
Function & Features:
- ressure output is designed with adjustable output structure to meet the demand of various machines and available to couple with relative pressure adjustment. Designed with oil level detector to detect the oil capacity stored in the tank and response well at appropriate time to succeed for connection movement step. Instant knob to have deviced with in-time demand button and lets machine, while at initial start, have the deserved oil capacity for smooth operation to reduce unnecessary friction. Absorbs oil from the deepest part and makes use of principle of Pascal to increase greatly the oil output power as well as to remove the shortcoming of gap between oil tubes. Designed with oil pressure detector (3~10kg/cm2), featured as follows to detect for the loss below: (1) Broken oil tube: detecting if insufficient pressure inside the tube. (2) Blockaded oil network: detecting if any blockaded on oil inlet for the sake of turbid oil condition. (3) Poor motor: detecting if the motor had poor running, (4) Insufficient oil pressure: detecting if the output power is insufficient for old used part to result in insufficient pressure condition. (5) No oil in the tank: Detecting and alarm output if the oil level than the safe level. 功能特長 FUNCTION AND FEATURES F. 電動系列 TM型抵抗式/脫壓式潤滑幫浦Resistant-type / Pressure-relief Lubricant Pump TM-3F、TM-3CF型可由PLC直接輸出或由外部計時器做直接或間接的控制運轉。 使用TM-3F、3CF型時可配合調整式分配器，VB,DB-A, DB-AS及抵抗式接頭P型，使用壓力可調整在3-5kg/cm2，接頭流量規 格使用設計差距勿過大，如(#0, #1, #2)，(#1, #2, #3)配較適合。 使用TM-3FW、3CFW型附有脫壓結構型時可配合使用定量容積式分配器HA、HBL、HBH，並可增設壓力檢知回饋，以確認管 路壓力是否達到標準15kg/cm2使用壓力檢知回饋信號時，必須增設延時TIMER及偵測TIMER在正常時壓力開關確認後而帶動 延時TIMER計時適時的操作，反之在偵測時間60秒內無法達到所設定的壓力時，必須設定警報及斷電，繼而檢查各項的缺失。 使用TM-3FW、3CFW型配合使用容積式分配器時因使用壓力較高，因此所使用的各式油管也必須配合使用較高壓型油管， 才能發揮最大的功能。 因使用地區的溫度不同，使用者必須注意因溫差所導致油粘度變化，而更換適合的油質及使用壓力，氣溫在20º以下的則可選用 20#的機油，而氣溫在20º以上的則可選用30#的機油，而使用的壓力也必須有所調整。 使用說明DIRECTION OF USE G. 1. 2. 3. 4. 5. 1.
X
Contact Us
Asavari Santosh Yewale (CEO)
AS CNC Solutions
S No 74, Flat No A/402, Mahalaxmi Residency, Residence, Ravet, Near DY Patil College
Pimpri Chinchwad - 412101, Pune, Maharashtra, India
Send Email